User guide

RASExpress User Guide
102 CommPlete Communications Server
Shared Secret
Type the shared secret used for communication between the RASExpress server and
the security server. It must match the shared secret configured at the security server.
Confirm Shared Secret
Type the shared secret again to confirm that you typed it correctly
Allow Call If Security Server Down
Enable to provide access by any user if the primary and all backup security servers are
down. Disable to prevent any user from logging on if the security servers are all down.
Primary Server Address
Type the IP address of your primary security server.
Backup Server Address
Type the IP address of your backup security server. You can specify up to three
backup security servers.
Call Back Delay Attribute Value
Enter the value you have chosen for the Callback Delay attribute. You must set up the
same attribute in the dictionary file of your RADIUS server. Make sure that you select
a unique attribute value. The value must not clash with any of the standard RADIUS
attributes or any other custom attributes. Consult your RADIUS server documenta-
tion before making any changes.
Remote User Enter Number Attribute Value
Enter the value you have chosen for the Remote User Enter Number attribute. You
must set up the same attribute in the dictionary file of your RADIUS server. Make
sure that you select a unique attribute value. The value must not clash with any of the
standard RADIUS attributes or any other custom attributes. Consult your RADIUS
server documentation before making any changes.
Protocol Permissions Attribute Value
Enter the value you have chosen for the Protocol Permissions attribute. You must set
up the same attribute in the dictionary file of your RADIUS server. Make sure that
you select a unique attribute value. The value must not clash with any of the standard
RADIUS attributes or any other custom attributes. Consult your RADIUS server doc-
umentation before making any changes.
Inbound User Service Type Value
Enter the service type value that you have chosen for Inbound User. You must set up
the same service type value in the dictionary file of your RADIUS server. Make sure
that you select a unique service type value. The value must not clash with any of the
standard RADIUS service types or any other custom service types. Consult your
RADIUS server documentation before making any changes.
Shell User Service Type Value
Enter the service type value that you have chosen for Shell User. You must set up the
same service type value in the dictionary file of your RADIUS server. Make sure that
you select a unique service type value. The value must not clash with any of the stan-
dard RADIUS service types or any other custom service types. Consult your RADIUS
server documentation before making any changes.