User guide

4 Browser Management
CommPlete Communications Server 93
Physical Port Setup
Use the Physical Port Settings pages to configure an individual physical port.
When you click Physical Port Setup in the Configuration of Server menu, a list of
physical ports appears. Select the port you want to configure, and click Submit. Then
make your changes in the Physical Port Settings page. When you are done, click
Submit to save the information and return to the Configuration of Server menu, or
click Reset to cancel your changes.
Port Name
Shows the name of the port you are configuring. Port names consist of two parts. The
numeric part of the name identifies the slot the port is installed in, while the
alphabetic part identifies a specific port in that slot. Thus, the port name 2C identifies
the third port in slot 2.
Auto Dialout
Select ON to enable auto dialout for the port. Select OFF to disable auto dialout.
Auto Dialout TCP Port Number
Type the auto dialout TCP port number. This field is inactive if Auto Dialout is off.
Raw TCP Connection
Select OFF to disable all Telnet negotiations on the port, so that the connection is
treated as a “raw” TCP data stream.
When a standard Telnet connection is made, certain parameters are negotiated, such
as terminal type and screen size. However, some applications use Telnet for faxing or
credit card validation for which negotiation is neither required nor recommended. It
is for such applications that you should disable this option.