User guide
MultiModem MT5600ZDX and MT5600ZDXV
Modem Driver Installation for Windows NT
1. Make sure your modem is connected properly, and then turn on
your computer. Windows should detect your new modem and
open the Install New Modem wizard.
Note: If Windows cannot find a modem, your modem may be turned
off, it may be plugged into the wrong connector on your computer,
or the serial cable may be faulty. See None of the LEDs Light When
the Modem Is Turned On and The Modem Does Not Respond to
Commands in the Troubleshooting chapter of the User Guide.
2. In the Install New Modem wizard, select Dont detect my modem;
I will select it from a list, and then click Next. A dialog box with
a list of manufacturers and a list of modem models appears.
3. Insert the system CD-ROM and then click Have Disk.
4. In the Install from Disk dialog box, select the drive that the CD is
in, and then click OK.
5. A list of modems appears. Select your modem and click Next.
6. Select the port that the modem is connected to, and then click Next.
7. Windows installs and configures the modem.
8. Click Finish to exit.