TM TM Model MT5600ZDX Model MT5600ZDXV Data/Fax Modem Voice/Data/Fax Modem Quick Start Guide
MultiModem MT5600ZDX and MT5600ZDXV Quick Start Guide Models MT5600ZDX & MT5600ZDXV PN 82098752 Revision C This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 1999-2002, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc.
Quick Start Guide Getting Started This guide shows you step-by-step how to set up your Multi-Tech MT5600ZDX or MT5600ZDXV modem. For detailed information on how to install, test, and use your modem, see the complete User Guide on CD-ROM provided with your modem. What You Will Need Before starting, make sure you have everything you will need.
MultiModem MT5600ZDX and MT5600ZDXV Safety Warnings Use this product only with UL- and CUL-listed computers. Never install phone wiring during a lightning storm. Never install a phone jack in a wet location unless the jack is specifically designed for wet locations. Never touch uninsulated phone wires or terminals unless the phone line has been disconnected at the network interface. Use caution when installing or modifying phone lines.
Quick Start Guide 1. Connect the Modem to Your PC Plug one end of the RS-232 serial cable into the RS-232 connector on the modem, and plug the other end into a serial port connector on your computer, such as COM1 or COM2. You supply the RS-232 cable. 2. Connect the Modem to the Phone Jack Plug one end of the phone cable into the modems LINE jack and the other end into a phone wall jack. The phone cable is included with your modem. Note: The LINE jack is not interchangeable with the PHONE jack.
MultiModem MT5600ZDX and MT5600ZDXV Connections for the MT5600ZDXV PWR RS232 PHONE LINE Figure 2. MT5600ZDXV Connections 1. Follow all of the Connection Directions for the MT5600ZDX Then add these steps: 2. Connect the Microphone For voice mail or speakerphone applications, plug an unamplified microphone into the MIC jack on the side of the modem. The microphone should have a stereo 1/8-inch mini plug. Do not use a monophonic microphone. 3.
Quick Start Guide Installing the Modem Driver If you use Windows 95/98/Me/NT/2000/Xp, you must install the modem driver as described here. If you use another operating system, see the User Guide. When operating the modem under Windows 95/98/Me/ 2000/Xp, the modem driver can be installed by using the Plug-and-Play feature. Follow the 4-step procedure below. For Windows NT, which does not support Plug-and-Play, follow the 8-step procedure on the next page.
MultiModem MT5600ZDX and MT5600ZDXV Modem Driver Installation for Windows NT 1. Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Install New Modem wizard. Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into the wrong connector on your computer, or the serial cable may be faulty.
Quick Start Guide Loading Data Communications Software MultiTech includes a data communications software package on the product CD shipped with your modem. In general, however, the modem will work with most data communications software packages. Data communications software gives the user access to lower-level commands that govern (at a detailed technical level) how the modem operates, that is, how the modem handles incoming and outgoing data streams, etc.
MultiModem MT5600ZDX and MT5600ZDXV
Quick Start Guide
Technical Support Country By Email By Phone France: India: U.K.: U.S and Canada: Rest of the World: support@multitech.fr support@multitechindia.com support@multitech.co.uk support@multitech.com support@multitech.com +(33) 1-64 61 09 81 +91 (124) 6340778 +(44) 118 959 7774 (800) 972-2439 +(763) 717-5863 Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 U.S.A. +(763) 785-3500 or (800) 328-9717 U.S.A. Fax +(763) 785-9874 http://www.multitech.com ftp://ftp:multitech.
