User guide

March 2011 Page 28 of 30
RJ45 Serial Port Pin Outs & Standard Cable specification
The TERM port and the Console port TX and RX pin outs are identical, however, the TERM ports also supports DSR, DTR Signals.
The Console Port supports ONLY TX, RX and GND.
The Console port Pins 1 to 8 and pins 2 to 7 are looped back, these pins (normally associated with signals RTS/CTS and DSR/DTR Signals).
The TERM port pins 1 to 8 are also loped back (Normally associated with RTS-CTS Signals).
Please refer to the pin out Matrix below for the pin outs required for your specific device attachment, or alternatively please refer to the following
pages in this document for standard cable and adapter pin outs
Straight RJ45 to RJ45 (Patch Lead)
To Connect Pushkablue Console ports to Any Cisco, Checkpoint, Fortigate, Juniper, Nokia RJ45 Console Port
Part No:FF-DB9F
To Connect Pushkablue Console port to Any 9 Way DB Male (DTE) connection
Pushkablue to PC Comm Port Adapter