User guide

March 2011 Page 17 of 30
(3)- Set Port Names
You may wish to change the FF06-2P console port (1 to 6) names, so operators can identify the correct console device.
From the Main Menu , choose Pushkablue Setup Options, then
Choose 3 Set Port names.
(Example F<CR>, then 3<CR>)
You will be asked to choose a port number
Select Port 1 2 3 4 5 6 A1 B1 :
So if you wish to change console 1 to another name such as Cisco-2800-01
Type: 1<CR>
Current Port Label : Console
Change (y/n)?
Type:Y<CR>
Next you will be asked to input the console port name (Spaces are allowed) 1-32 Characters.
Enter Port Label (Up to 32 Characters) :<New Port Name><CR>
When you go back to the Main Menu, you should now see the Console port name has been changed.
(4) – Set System Time and Date
To Change the System Time and Date
From the Main Menu , choose Pushkablue Setup Options, then
Choose 4 Set System Time and Date
(Example F<CR>, then 4<CR>)
You will be given a prompt:
Current time is 01Jan1980 02:32:11
Change (y/n)?
Type: Y<CR>
You will receive another prompt:
Enter Date (dd/mm/yy):
The date is set DD/MM/YY, example: 31/12/08,
So Type: DD/MM/YY<CR>
Another prompt for the time will appear: Enter Time (hh:mm:ss):
The Time is set HH:MM:SS, example: 23:10:00
So Type: HH:MM:SS<CR>
You will then be sent back to the Pushkablue setup Options menu.