User guide

March 2011 Page 13 of 30
Add, Change & Delete Users
Each Administrator (Admin 1 and Admin 2) can add up to 10 User Accounts to each. User Accounts do NOT have configuration rights.
This section shows you how to: Add, Change & Delete user names, Passwords and Port Assignments.
Each Administrator can have up to 10 User Accounts (U1 to U10), Users do NOT have configuration rights
The Abbreviated Commands below show how to set up users and their parameters.
(Please note: <CR> = Enter)
Abbreviated
Command
Admin 1
Admin 2
Parameters/Values
Description
U
n
N=
 
1-16 Characters (No
Spaces)
Case Sensitive
Enables you to Add or Change Username
n
where n value is 1 to 10 (Users 1 to 10)
Example: U7N= FirewallOps01<CR>
FirewallOps01 User name has been created in slot 7
U
n
P1=
 
Minimum 8, Maximum 16
Characters, Case
sensitive
Enables you to Add or Change User
n
Password 1
where n value is 1 to 10 (Users 1 to 10)
Example: U7P1= FireOpsPassword 1<CR>
FirewallOps01 1
st
Password is now: FireOpsPassword1
U
n
P2=
 
Minimum 8, Maximum 16
Characters, Case
sensitive
Enables you to Add or Change User
n
Password 2
where n value is 1 to 10 (Users 1 to 10)
Example: U7P2= FireOpsPassword 2<CR>
FirewallOps01 2
nd
Password is now: FireOpsPassword2
UnCP=
 
1;2;3;4;5;6
Enables you to Assign Console Ports 1 to
6
to User
n
where n value is 1 to 10 (Users 1 to 10)
Please note: Each port number should be separated by a semi-colon (;)
Example: U7CP=1;24;5<CR>
User 7 (FirewallOps01) has console Port access to Ports: 1 ,2,4 & 5
U
n
PP=
 
A1 & B1
Enables you to Assign Power Port A1 & B1 to User
n
where n value is 1 to 10 (Users 1 to 10),
Please note: Each port number should be separated by a semi-colon (;)
Example: U7PP=A1<CR>
User 7 (FirewallOps01) has Power Port access to:A1
U
n
DB=
 
Telephone number
(16 digits)
Add or Change a Dial back Security telephone number including
commas (,) where n value is 1 to 10 (Users 1 to 10)
example: U7DB=9,1234567890
User 7 (FirewallOps01) dial back number is: 9,1234567890
U
n
DEL
 
1-10
Enables you to Delete Username
n
where n value is 1 to 10 (Users 1 to 10)
Example: U7DEL<CR>
User 7 (FirewallOps01) is now Deleted
DELALL
 
<CR>
Deletes
ALL
users in database (UPPER CASE)
Example: DELALL<CR>
ALL Users are now DELETED
You can add any parameter to any user account at anytime.
However, if you change the Console port or Power Port assignments to an existing User account, you have to re type ALL of the port numbers,
because the system overwrites the current port assignment status of that User.
If you are assigning more than one port Console Port or Power Port to a User, each port number must be separated by a semi-colon (;).
Example User setup configuration for User 1:
U1N=FirewallOps02<CR>
U1P1=FireOpsPassword1<CR>
U1P2= FireOpsPassword2<CR>
U1DB=9,3314569001<CR>
U1CP=1;2;3<CR>
U1PP=A1<CR>