Specifications

Chapter 1 – Universal Socket Connectivity
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342F) 12
Universal Developer Kit Contents
All products covered in this document can be evaluated using the MTSMI-UDK (Universal Developer Kit).
• One MTSMI-UDK Developer Board
• One 100-240V 9V-1A power supply w/IEC-320 connector
• One IEC-320 power cord w/US type plug
• One IEC-320 power cord w/EURO type plug
• One IEC-320 power cord w/UK type plug
• One RJ-45 cable (CARJ45NK-RJ45 7’8C non-keyed)
• One 7 foot RJ-11 cable plug - plug/4C
• One SMA jack to MMCX plug antenna cable (for CDMA and GPRS antennas)
• One RSMA jack to MMCX plug antenna cable (for Bluetooth antenna)
• One antenna 850/1900, right angle, 3-stripe (for CDMA and GPRS modules)
• One antenna 900/1800, right angle 4-stripe (for GPRS modules)
• One 2.4GHz ½ WAVE antenna with reverse polarity (for SocketWireless Bluetooth and SocketWireless
Wi-Fi)
• One DB9F-DB25M 6 foot modem serial cable
• One generic CDMA Activation Notice
• One Verizon Activation Notice
• One Spring Activation Notice
• One Cingular Activation Notice
• One Universal Socket Connectivity Developer CD with BVRP Mobile PhoneTools
• One Promo Screwdriver
AT Commands Are Included on the Developer CD
AT Commands
Multi-Tech provides Reference Guides for each SocketModem's AT commands, fax commands, and
voice commands. These reference guides are available on the CD included in the Developer Kit. They
are also available by email at mailto:[e-mail] or by using the Developer Guide
Request Form on Multi-Tech's Web site.
Fax Commands
Fax Commands are included in the AT Command Reference Guide when applicable to the product.
They are available on the CD included in the Developer Kit.
Note: Fax Commands supported by product:
• SocketModem MT5600SMI supports Class 1 & 1.0
• SocketModem MT5656SMI supports Class 1 & 2 (not 2.0/2.1)
• SocketModem MT5634SMI supports all Class 1 and Class 2 commands (Class 1, 1.0, 2, 2.0/2.1)
• Wireless SocketModem GPRS MTSMC-G supports Class 1 core commands only (defined by
ITU T.31)
• Wireless SocketModem CDMA MTSMC-C supports Class 2.0
• Wireless SocketModem EDGE MTSMC-E supports Class 1
Voice Commands
Voice Commands Reference Guides are available on the CD included in the Developer Kit.
• SocketModem MT5600SMI supports +V commands
• SocketModem MT5656SMI supports +V (including speakerphone)
• SocketModem MT5634SMI supports +V commands
• SocketModem EDGE applicable voice commands included in the EDGE AT Command
Reference Guide.