Specifications

Chapter 1 – Universal Socket Connectivity
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342I) 39
Certifications, Approvals, Compliance, and
Requirements
Wireless Approvals (GSM, CDMA)
The Multi-Tech SocketModem is Industry and/or Carrier Approved as an End Product modem. When integrated and used
with an antenna system that was part of the Multi-Tech modem certification, no additional approvals or certification is
required (however, CDMA has a few exceptions) for the device you develop as long as the following are met:
• PTCRB Requirements:
The antenna system cannot be altered.
• Model Identification:
IMPORTANT
When the wireless carrier asks you to provide the modem's model identification,
give the Multi-Tech wireless model identification, not the identification of the host device.
See the label example below.
The Multi-Tech model identification allows the carrier to verify the modem as one of its approved models.
This information is located on the modem's label.
Example:
The following is an example of Multi-Tech's wireless model identification:
MTSMC-G-F4 – Multi-Tech wireless GPRS model identification.
MTSMC-C – Multi-Tech wireless CDMA model identification.
MTSMC-E – Multi-Tech wireless EDGE model identification.
The following is an example of an end product GPRS label:
Host Device
Identification
Multi-Tech Model
Identification
IMEI
(International Mobile
Equipment Identity)