Specifications

Chapter 1 – Universal Socket Connectivity
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342I) 12
Universal Developer Kit Contents
All products covered in this document can be evaluated using the MTSMI-UDK (Universal Developer Kit).
• One MTSMI-UDK Developer Board
• One 100-240V 9V-1A power supply w/IEC-320 connector
• One IEC-320 power cord w/US type plug
• One IEC-320 power cord w/EURO type plug
• One IEC-320 power cord w/UK type plug
• One RJ-45 cable (CARJ45NK-RJ45 7’8C non-keyed)
• One 7 foot RJ-11 cable plug - plug/4C
• One SMA jack to MMCX plug antenna cable (for CDMA and GPRS antennas)
• One RSMA jack to MMCX plug antenna cable (for Bluetooth antenna)
• One antenna 850/1900, right angle, 3-stripe (for CDMA and GPRS SocketModems)
• One antenna 900/1800, right angle 4-stripe (for GPRS SocketModems)
• One 2.4GHz ½ WAVE antenna with reverse polarity (for SocketWireless Bluetooth and SocketWireless Wi-Fi)
• One DB9F-DB25M 6 foot modem serial cable
• One generic CDMA Activation Notice
• One Verizon Activation Notice
• One Spring Activation Notice
• One Cingular Activation Notice
• One Universal Socket Connectivity Developer CD with BVRP Mobile PhoneTools
• One Promo Screwdriver
AT Commands Are Included on the Developer CD
AT Commands
Multi-Tech provides Reference Guides for each SocketModem's AT commands. These reference guides are
available on the CD included in the Developer Kit. They are also available by email at
mailto:[e-mail]
or by using the Developer Guide Request Form on Multi-Tech's Web site.
Fax Commands
Fax Commands are included in the AT Command Reference Guide when applicable to the product. They are
available on the CD included in the Developer Kit.
Note: Fax Commands supported by product:
• SocketModem MT5600SMI supports Class 1 & 1.0
• SocketModem MT5656SMI supports Class 1 & 2 (not 2.0/2.1)
• SocketModem MT9234SMI supports all Class 1 and Class 2 commands (Class 1, 1.0, 2, 2.0/2.1)