Owner`s manual

PN 88300150
4/3/01 77
Appendix C
DIP-Switch Summary
DIP-Switch Condition Effect
Asynchronous Mode
#1 *UP DTR dependent on interface
Down DTR force On at all times
#2 *UP Hardware Flow Control
Down Xon/Xoff Flow Control
#3 UP Disable Command Mode Response (dial up)
*Down Enable Command Mode Response (dial up)
#3 UP -10 dB Transmission (leased line)
*Down 0 dB Transmission (leased line)
Note: dB transmission levels on International models may be different from those values shown above.
Note: Switch #3 has no effect in leased line mode in the MT2834MRK.
#4 *UP UUCP Spoofing Disabled
Down UUCP Spoofing Enabled
#5 *UP Enable Automatic Answer (dial up)
Down Disable Automatic Answer (dial up)
#5 *UP Answer Mode (leased line)
Down Originate Mode (leased line)
#6 *UP Max throughput Enabled
Down Max throughput Disabled
#7 UP RTS dependent on Interface
*Down RTS forced On at all times
#8 UP Disable Command Mode
*Down Enable Command Mode
#9 UP No function
*Down
#10 *UP Dial-Up Operation
Down Leased Line Operation
#11 UP "AT" Responses
*Down Multi-Tech Responses
#12 UP Synchronous Mode
*Down Asynchronous Mode
See page C-3 for information on DIP-Switches #13 - #16