Owner`s manual

PN 88300150
4/3/01 52
&E11 = Normal Mode Modem Flow Control (Xon/Xoff) on
Computer (or Terminal)-Initiated Flow Control(Pacing) Commands:
&E12 = Pacing off
&E13 = Pacing on (either RTS on/off or Xon/Xoff depending on the setting of &E4 or &E5).*
*Factory default setting
**The factory default setting for data compression is enabled, but the modem will not compress data
(&E15) unless &E1 (auto-reliable mode) or &E2 (reliable mode) is also selected.
Data Compression Commands:
&E14 = Data Compression disabled
&E15 = Data Compression enabled**
*Factory default setting
**The factory default setting for data compression is enabled, but the modem will not compress data
(&E15) unless &E1 (auto-reliable mode) or &E2 (reliable mode) is also selected.
5.14 Error Correction Result Codes
When the MT2834MR is operating with error-correction enabled, five of its responses are altered, to let
you know that you have made a connection in Reliable mode. These Result Codes for a V.42 MNP
connection are listed below:
Verbose Terse
CONNECT RELIABLE 1R
CONNECT 1200 RELIABLE 5R
CONNECT 2400 RELIABLE 9R
CONNECT 4800 RELIABLE 11R
CONNECT 9600 RELIABLE 12R
CONNECT 14400 RELIABLE 13R
CONNECT 19200 RELIABLE 19R
CONNECT 21600 RELIABLE 21R
CONNECT 24000 RELIABLE 24R
CONNECT 26400 RELIABLE 26R
CONNECT 28800 RELIABLE 28R
CONNECT 31200 RELIABLE 31R
CONNECT 33600 RELIABLE 33R
The result codes for a V.42 LAP-M connection are listed below:
Verbose Terse
CONNECT LAPM 1L
CONNECT 1200 LAPM 5L
CONNECT 2400 LAPM 9L
CONNECT 4800 LAPM 11L
CONNECT 9600 LAPM 12L
CONNECT 14400 LAPM 13L
CONNECT 19200 LAPM 19L
CONNECT 21600 LAPM 21L
CONNECT 24000 LAPM 24L