Owner`s manual

PN 88300150
4/3/01 20
$MBn Modem Baud Rate
Nd Dial Stored Telephone Number
NdNe Number Linking
OOn-line from Command Mode
P Pulse Dial
&Pn Set Pulse dial ratio*
#Pn Parity Select
Qn Result Codes
&Qn Command set select
Rn Reverse this mode
&Rn CTS control
*Rn Ring message on callback modem
&RFn CTS follow RTS control
$Rn Retransmit count
S= S-Register, set value
S? S-Register, read value
$SBn Serial port Baud rate
&Sn DSR control
&SFn DSR follow CD control
$SP UNIX UUCP Spoofing
TTone dial
#T Enable/Disable Trellis Coded Modulation
&Tn Recognise RDL signal
U U-loop test
Vn Verbose or Terse result codes
#V User control of V.32terbo in Answer Mode
W Wait for new dial tone
&Wn Store configuration in RAM
X Extended or basic Result Codes and Call Progress
&Xn Clock select
Yn Long space disconnect
Z Zap (reset modem)
+++ Escape to Command Mode when on-line
, Pause in dialing
; Revert to Command Mode after dialing
! Flash On-Hook
@ Quiet Answer
+++AT<CR> Escape Sequence: Entering Command Mode While On-Line
BREAK AT<CR> Alternate Escape Sequence: Entering Command Mode While On-Line
Refer to Appendix F of this manual for a summary of commands.