Specifications

USING DIAL-UP • VOICE & DATA CONNECTION

7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com

Voice Only Connection

This connection enables you to remotely retrieve information and

issue commands using any Touch-tone telephone.

1. Route the telephone line through a TELCO surge suppressor

to the LINE jack on VRC2500.

SELECTING THE CORRECT MODE

The VRC2500 has two modes of operation: Data Mode and Voice

Only Mode. The Data Mode allows you to interact with your site

using a PC or laptop. You can also access the Voice feature using

a Touch-tone telephone. The Voice Only Mode allows you to

interact with your site using a Touch-tone telephone.You can not

retrieve data using a PC when connected for this mode.

Data Mode

From your PC or laptop, click on the site icon in the Explorer

toolbar. Once connected to the site, use the VRC software to

retrieve and view data. Make sure you have entered the proper

settings in the Site Properties window including the connection

phone number.

To access the Voice Mode, call the connection phone number

using a Touch-tone telephone. When prompted, enter your access

code to begin a Voice Mode session.

Voice Only Mode

Call the Dial-Up using a Touch-tone telephone. When prompted,

enter your access code to begin a Voice mode session.

Connecting a Telephone Line to the VRC2500