Specifications

75
SITE MANAGEMENT • DIAL-UP SETUP
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
SITE DESCRIPTION
The site was named in the Site Properties
window, see page 21, and the General Setup
icon was named in the last section see page 56,
however, up to this point the Dial-Up icon has
had no name. The Description function in the
Dial-Up Configure window allows you to name the Dial-Up icon.
1. Double-click the Description icon in the Configure window to
open the Description window.
2. Enter the Dial-Up component name. The name can consist of
any alphanumeric title up to 20 characters long.
The Site name cannot be changed from this location.
3. Click OK, APPLY or UPLOAD to save the name.
SITE ACCESS
To avoid confusion, the Dial-Up Site Access
settings should be the same as the General
Setup Site Access settings. Open the General
Setup Site Access window and use the Copy to
the Clipboard function to capture the settings. In
the Dial-Up Site Access window click the Copy From the
Clipboard icon to paste the settings into the Dial-Up Site Access
window.