Specifications

MACROS
Macros are written and compiled in the Macro
Programming window. To open this window,
double-click the Macros icon in the Configure
Unit window.
See Chapter 6: Creating Macros, for detailed information on
writing and using macros.
TIMED EVENTS
Timed Events is the internal scheduling program
of the VRC2500 unit. It is most commonly used
to execute data captures but can also control
command outputs and macros.
The Timed Events program is accessed through the Configure
window. Click on the Timed Events icon to open the Timed
Events window. From this window you can create new timed
events as well as edit existing entries.
Creating a New Entry
To create a new entry, click on the double-left arrow next to the
time field. This opens the Command Schedule Time window
where you specify the date and time for the event. Click OK or
Apply to set the time and return to the main window. Once you
have defined the time for the event, choose the double-left arrow
next to action to define what action will occur. You will define the
action using the Action Window (see page 56).
SITE MANAGEMENT • GENERAL SETUP
60
7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com
New Entry Window