Specifications

SITE MANAGEMENT • GENERAL SETUP
56
7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com
Action Window
The Action window opens when you
click on the drop-down arrow in the
column for 1U Action, 1L Action,
2UAction, or 2L Action. In the Site/Unit
pane, you select the which unit is to
receive the action.
Commands Tab Select any command
channel from any unit connected via the
G-bus at this site and activate it. Select
unit first, then select command to issue.
Macros Tab Select any macro from any
unit connected via the G-Bus at this site
and run it.
CAUTION: If only one upper and
lower limit is needed, use the second
upper (2U) and second lower (2L).
When the second limits are
exceeded, the unit takes the action
specified for the second limits and
ignores the first. Setting the first
limits only could create a situation
where the action is ignored because
the second limit was passed also.
Capture Tab Select whether or not this
unit captures information at this time for
future downloads or archives using the
VRC Database software.