Specifications

43
SITE MANAGEMENT • SITE PROPERTIES
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
Other Tab
The other tab is used to set data collection options, time options
and viewing options.
Data Collection Options
The “Clear Capture History after downloaded to this PC” option
will delete data captures from the I/O units buffer upon
downloading. Although it is checked by default, only one
computer should have this option selected. To prevent alarms
from reporting to this connection, simply un-check the box for
“Accept Alarm Notifications From this Site.” When not selected,
that PC will not receive any alarm notices from that site.
Site Time Options
Change the VRC's internal clock to adjust for Daylight Savings
Time. If the site and the PC are in different Time Zones, enter the
number of minutes the site time zone differs from the PC time
zone (e.g., 60, -120).
Site Viewing Options
Show inactive units that have been connected to a G-bus network
at this site, but are not connected at this time. Change the refresh
rate for monitor readings (1000ms to 30000ms). The default
setting is 3000ms. If you are using programs like PC Anywhere
and Remotely Possible that affect the viewing display, try
increasing the refresh rate.
If you are using a product
like PC Anywhere or
Remotely Possible,
changing the Monitor Readings
refresh rate can improve the
Viewer display.
✍✍
To disable the “Remember
My Password” feature
when you log on to your
site, erase the password entry in
the User Password box.
✍✍
Only one PC should be
designated to capture and
clear the history. All other
PCs connecting to your VRC2500
should have the “Clear Capture
History” option unchecked.
✍✍