Specifications

ADJUSTING SITE PROPERTIES
Adjusting site properties is done through the Site Properties
window. There are two ways to open this window.
The new site button opens a New Site Properties window
that is used to create a new icon for your site on the VRC
Explorer control bar. You will also use the properties window to
name your site, assign a network number, and also defining the
connection to the site.
To change or add information in a site’s property window,
click on the site icon and then the Adjust Site Properties
button from the toolbar, or right-click on the Site icon and select
Properties from the menu.
The Site Properties window has four tabs: General, Connection,
Security and Other.
General
The general tab is where you enter your site’s name and network
address here. See page 19 for more detailed instructions.
Connection
Configure the connection method you are using to communicate
with your site. See page 18 for more detailed instructions.
41
SITE MANAGEMENT • SITE PROPERTIES
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
Site Properties
All database records use
the site network number
and unit number as
references. If you do not assign a
different network address to each
of your sites, all data will be
merged together as though it
came from a single site.
!