Specifications

31
INSTALLATION & SETUP • CONNECTING EQUIPMENT
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
Never use the DIRECT
Port for leased-line
operation.
!
You must cycle the power
on the VRC unit before the
modem is detected.
✍✍
TWO-WIRE LEASED-LINE MODEM
If connecting to a two-wire leased-line (also called dedicated or
private lines), you need a two-wire modem capable of leased-line
operation. We recommend the MultiTech four-wire modem.You
need to make sure the modem is set up for two-wire leased line
operation. If using a MT2834BL, adjust DIP switch 16. See DIP
switch table on page 36.
Follow the four-wire modem configuration instructions beginning
on page 26.
Connect the Studio modem to the PC using the manufacturer's
instructions. Connect the Transmitter modem to the VRC unit
using the FULL-TIME (COM 1) port
Modem serial connections should be made using the provided
null-modem serial cable.
Connecting Two-Wire Leased-Line Modem to VRC Unit