Specifications

INSTALLATION & SETUP • CONNECTING EQUIPMENT
28
7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com
5. Turn on modem. The lights on the front of the modem will
flash as the modem begins to initialize. When the lights stop
flashing, you have approximately 10 seconds to click the
appropriate Program button. If the modem finishes initializing
before you click the Program button, it will not accept the
programming.You will need to power cycle the modem and
program again.
6. Program the first modem as either Studio or Transmitter.
Make sure you label your modem so that you know which
modem is which.
7. After the window shows a successful modem programming,
change the DIP switches as instructed onscreen. When
finished, connect the second modem directly to the PC COM
port and program it using the other option.
MultiTech MT5600BL
1. Designate one modem as the Studio modem and one as the
Transmitter modem. Connect the first modem to your PC with
the provided DB9-DB25 serial cable and turn on the power.
2. Use your modem user’s guide to setup your modem to use
the settings listed to the left.
Successful Modem Programming
Modem Programming Window, MultiTech MT2834BL
Before programming the MT5600BL,
set the modem to the following:
Studio Modem
Set to 4 WIRE LEASE ORIG mode
SYNC/ASYNC option set to ASYN NORM
Transmitter Modem
Set to 4 WIRE LEASE ANSWER mode
SYNC/ASYNC option set to ASYN NORM