Specifications

27
INSTALLATION & SETUP • CONNECTING EQUIPMENT
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
Motorola V.3400
1. Connect the first modem to your PC with the provided
DB9-DB25 serial cable and turn on the power.
2. Open the Communication Properties window and re-detect
the ports. The PC COM port connected to the four-wire
modem should be recognized as a Direct Serial connection.
3. Select the COM port and click Properties for COM “x” to
open the Modem Programming window.
4. Click the bottom tab labeled Motorola v.3400.
5. Click Program as Transmitter Site Modem. When the first
modem is programmed, connect the second modem to the
PC COM port and program it as the studio modem.
MultiTech MT2834BL
1. Connect the first modem to your PC with the provided
DB9-DB25 serial cable and turn on the power.
2. Open the Communication Properties window and re-detect
the ports. The PC COM port connected to the four-wire
modem should be recognized as a Direct Serial connection.
3. Select the COM port and click Properties for COM “x” to
open the Modem Programming window.
4. Click the bottom tab labeled MultiTech MT2834BL. Before you
can program the modem, you must set DIP switches as
indicated on the screen.
Modem Programming Window, Motorola V.3400
Label each modem as
studio or transmitter to
help avoid mix-ups.
✍