Specifications

19
INSTALLATION & SETUP • SITE SETUP
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
The Security and Other
options can be configured
at a later time. See page
44 for a detailed description of
these options.
✍✍
3. Click on the Connection tab. Determine the method(s) of
connection from the PC to the Site. Click on the PRIMARY
CONNECTION radio button and choose which of the active
COM ports is to be used. If a direct connection is selected,
no further information needs to be entered.
If desired, a secondary connection method may be selected.
Click on the SECONDARY CONNECTION radio button. Now a
different connection path may be configured. The secondary
connection is used if the primary connection fails.
Link Address If a Dial-up Modem connection is selected, the
telephone number, including any dial-out prefixes and area
codes, must be entered in the Link Address box. The phone
number should be followed by several commas (each represents
a 2 second pause) and the code 020 for Data Mode (,,,,,020).
Timeout and Attempts Choose the number of seconds the PC
waits for the answering modem to connect before it disconnects,
and the number of attempts to connect to the site before
stopping. The number of idle seconds before disconnecting
defaults to 3600 seconds (1hr).
4. Set up site icons for all of your sites.