Specifications

17
INSTALLATION & SETUP • COMMUNICATION PROPERTIES
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
4. Single-click on the active port in the PC Serial Ports area to
display more configuration choices.
5. Click on the radio button that corresponds with the type of
modem or connection you are using.
6. Check on the Link Loss box if you want this port to listen for
link loss. Link loss notification alerts any PC that is connected
to a site if the connection fails. The PC automatically attempts
to reconnect up to three times when it senses a link loss,
provided the option is enabled.
Repeat steps 4-6 for each active port.
7. Click APPLY to save changes. Click OK to close the window
or click on the tabs at the top to move to another option.
SETTING THE WORKSTATION ADDRESS
This address allows the VRC2500 unit to identify which PC is
connected to the site. It is necessary that each of your PCs
connecting to a VRC site have a unique workstation address.
A default workstation address is automatically generated. You can
accept this number as long as it is not used by another PC.
To change the default address, click on the Workstation Address
tab of the Site Manager Communication Properties window. Enter
a number from 85 to 254 in the white box. Click APPLY or OK to
save changes.