Specifications

211
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
APPENDIX F • TROUBLESHOOTING
WINSOCK.DLL
If you receive a system error message
when you start the server program stating
that WINSOCK.DLL cannot be found, you
will need to complete the procedure
outlined on this page.
1. Click on the Start menu. Select
Settings and then Control Panel to
open the Control Panel window.
2. Double-click on the Network icon to
open the Network window. Select Dial-
Up Adapter and click ADD to open the
Select Network Component Type
window. Select Adapter and click ADD.
3. The Select Network Adapters window
opens. Select Microsoft and Dial-Up
Adapter. Click OK.
You will be prompted to reboot the PC.
Click OK. If no network card is actually
present or needed for this PC, after the
above procedure is completed, you can
open the network configuration window
once again and remove the network
components you just added. The
WINSOCK.DLL file remains installed and
the VRC2500 software functions normally.