Specifications

15
INSTALLATION & SETUP • COMMUNICATION PROPERTIES
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
2. Double-click the System icon to open the System Properties
window.
3. Click on the
Device Manager
tab. Double-click
on PORTS to
display a list of
ports recognized
by Windows.
4. Double-click on the COM port that will be used with the
VRC2500 software to open the COM Port Properties window.
5. Click on the Port Settings tab. If you are using more than one
COM port, you need to check the settings on each one. Use
the following settings for VRC2500 units:
Use the same settings for a modem or a direct serial connection
from the PC to the VRC unit.
Bits per second:
19200
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
Xon / Xoff
Windows Device Manager