Specifications

134
MANAGING TASKS & DATA • DATA BROWSER
7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com
Grid Column Definitions
Captures
Unit Name
displays the name you assigned to the selected unit.
Channel
# displays the metering, status, and/or command
channel number 1-16 (1-8 for an I/O 8 unit) you have selected. If
you have selected all three types of channels, they will be
grouped on the same row by channel number.
Log
Time shows the time of the last data capture on the selected
channel(s).
T
ype displays the type of meter (represented by a numeric value)
used by the selected channel. 0 = 0 – 10 Volt Scale, 1 = -5 – +5
Volt Scale, 2 = Linear to Power Scale, 3 = Indirect Power Scale.
Meter
gives the meter value at the time of the last log capture.
M
Tolerance displays the first and second upper and lower limits
set for the selected meter channel.
M Mute
shows if the selected meter channel is muted or
unmuted.
Units
gives the unit of measurement used by the meter channel
(Volts, Amps, Kilowatts, etc.)
Status
displays an H or L indicating whether the channel is a high
or low channel.
S
Tolerance displays the user specified condition that will trigger
an alarm on this channel.
S Mute
shows if the selected status channel is muted or
unmuted.
Command displays an A or B depending on the last command
given on the selected channel.
Note
opens a note window where you can enter comments.
Alarms
Site Name
displays the name you assigned to the selected site.
Unit Name
displays the name you assigned to the selected unit.
Alar
m Time displays the time of alarms reported on the selected
channel.
T
ype shows whether the alarm was reported on a metering or
status channel.