Specifications

128
MANAGING TASKS & DATA • DATA BROWSER
7 Beaver Brook Road, Littleton, MA 01460 • 978-486-0086 • www.burk.com
4. In the Includes Data For Last ... section, select Day. Enter
the time using the following table as a guide.
If you want a different data selection, specify the date range
for the data to be included in the report.
Select Day for the previous calendar day.
Select Week to enable the options at the bottom of the
window. Select the starting and ending days of the week.
Select Month to change the options to calendar days of the
month. Select a date range from the previous 1 to 31 days.
Select Fixed Date(s) to change the Date/Time options. Select
the date range by entering the precise month, day, year, hour,
minute and second.
5. Select sites, units, and channels from the Available Sites
window and click Add. Clicking on the plus sign (+) in front of
the site name allows you to view units and channels. Only
sites with collected data appear in the Available Sites window.
6. Click Setup Scheduled Time. Select Daily in the Interval
Type section. Leave the Months, Weekdays, and Day of
Month areas blank. define the Hours, Minutes, and Seconds.
Example: If the Date/Time settings for the data range are
from 5:01 to 6:01, schedule the print time as Hour: 6, Minute:
01, and Second: 10.
If you do not want an hourly print job, set up the frequency
using the instructions on page 126 as a guide.
7. Click Apply and then OK to return to the print job properties
window and then Apply and OK to return to the Data Browser.
Print and Collection jobs
should only be created and
edited in the Data Manager.
Do NOT edit in the Scheduler. If
you need to make changes to jobs,
it is best to delete the old entry
and enter a new job.
✍✍
For captures taken
during the hours from ...
midnight to 1:00 A.M.
1:00 A.M. to 2:00 A.M.
2:00 A.M. to 3:00 A.M.
continue in same manner
10:00 P.M. to 11:00 P.M.
11:00 P.M. to midnight
Setting in table
Date/Time From
Hour Minute
00 00
01 01
02 01
22 01
22 59
Setting in table
Date/Time To
Hour Minute
01 01
02 01
03 01
23 01
23 59
Importing, exporting,
adding to, changing, or
deleting the database can
affect the print jobs that are stored
in the database and in the
VRC2500 Scheduler. If you modify
the database, the print job loses its
link to the database. To reassociate
your print jobs to the current
database, you need to open your
print jobs in the Data Manager
window. Select each print job
individually and click Edit to open
the Print Job window. Then click
OK to close the window.
!