Specifications

115
CREATING MACROS • MACRO EXAMPLES
TECHNICAL SUPPORT 978-486-0086 • [e-mail] • www.burk.com
The following pages contain several examples of typical macros.
If further assistance is needed in learning how to program
macros, visit the support section of the Burk Technology website
at www.burk.com.
Power Change
This example shows a power change and a limit change. First,
the macro mutes Meter Channel 2 to prevent any alarms that
might be triggered before the new limits are established. The
macro issues three commands to initiate the power change. Then
the macro sets new limits for Meter Channel 2. The 2nd Lower
Limit is set to 7 and the 1st Lower Limit is set to 7.4. The 1st
Upper Limit is set to 7.6 and the 2nd Upper Limit is set to 8. The
macro also sets new upper and lower limits for Meter Channel 3
but does not mute the channel. After all adjustments are
completed, the macro unmutes Meter Channel 2 and ends.
Power Change Macro
Macro Examples