User guide

Chapter 1 – Product Description and Specifications
MultiConnect AW User Guide 9
Device Maintenance
To maintain the MultiConnect:
● Do not attempt to disassemble the device. There are no user serviceable parts inside.
● Do not expose your device to any extreme environment where the temperature or humidity is high.
● Do not expose the device to water, rain, or spilled beverages. It is not waterproof.
● Do not place the device alongside computer discs, credit or travel cards, or other magnetic media. The
information contained on discs or cards may be affected by the phone.
● Rough handling, such as dropping or shaking it, can damage the device.
● Using accessories that Multi-Tech has not authorized or that are not compliant with Multi-Tech’s accessory
specifications may invalidate the warranty.
If the device is not working properly, contact Multi-Tech Technical Support.
Front Panel
The front panel displays three Signal Strength LEDs, a Carrier Detect LED, a Link Status LED, and a Power LED.
Signal Strength LEDs display the internal wireless device signal level when they are on; when they flash, a failure
has occurred. Refer to Chapter 7 for a description of the flashing Signal Strength LEDs.
● The Carrier Detect LED works for both analog and wireless. When solidly ON, both connections are
established.
● The Link Status LED lights when the unit is registering with the network and blinks when the unit is registered
with the network.
● The Power LED lights when power is supplied to the unit.
● The SIM door on the right side provides access to the SIM card holder.
MT200A2W-G and MT200A2W-H5
MT200A2W-C1