User guide

6 MultiConnect AW User Guide
Chapter 1 – Product Overview
The MultiConnect™ AW Analog-to-Wireless converter is a convenient turnkey solution that allows legacy
equipment with built-in analog modems to connect to a cellular network. By emulating the traditional dial-up
PSTN network and using a cellular modem, the affordable MultiConnect AW converter gives new life to devices
currently using traditional analog dial-up communications.
● The MultiConnect AW model (MT200A2W-G) with either internal GPRS or GSM cellular modem allows
connection to the cellular packet data network (GPRS) or the circuit switched data network (GSM).
● The MultiConnect AW model (MT200A2W-C1) with an internal CDMA cellular modem allows connection to a
CDMA 2000 1xRTT cellular network.
● The MultiConnect AW model (MT200A2W-H5) with an internal HSPA+ modem allows connection to a HSPA+
network.
The MultiConnect AW converter operates on standards-based communication networks and can be desktop or
panel mounted.
MT200A2W-G and MT200A2W-H5
MT200A2W-C1
Features
● Quad-band GSM/EGSM 850/900/1800/1900 MHz (MT200A2W-G)
● Dual-band CDMA2000 1Xrtt (MT200A2W-C1)
● Penta-band HSPA+ 850/900/1700/1900/2100 MHZ (MT200A2W-H5)
● Packet data up to 85.6 Kbps (MT200A2W-G)
● CDMA speeds 153K bps forward and reverse (MT200A2W-C1)
● Multi-Tech UIP stack
● Circuit-switched data up to 14.4 kbps (MT200A2W-G only. MT200A2W-H5 and MT200A2W-C1 do not support
this protocol)
● Analog connection speed up to 33600 (V34)
● Serial interface used for configuration and debug, fixed speed @ 115200
● On hook, off hook, and DTMF digit detection
● Dial tone and busy tone generation
● Phone number to IP conversion
● Device configuration via menu selections
● Device initialization script