User guide

51 MultiConnect AW User Guide
Chapter 7 – Troubleshooting
Flashing Signal Strength LEDs
Flashing signal strength LEDs indicate a failure condition has occurred.
● Low Flashing LED – Physical connection failed
● Medium Flashing LED – Analog line has returned to on-hook
● High Flashing LED – PPP user interrupt error
● Low and Medium Flashing LEDs – PPP failed to meet protocol error
● Low and High Flashing LEDs – PPP connection lost
● Medium and High Flashing LEDs – PPP failed authentication challenge
● Low, Medium, High Flashing at 50 msec – Get host by name failed
● Low, Medium, High Flashing at 200 msec – Failed to create TCP socket
● Low, Medium, High Flashing at 800 msec – Network connection failed