User guide

Chapter 4 – Device Configuration
MultiConnect AW User Guide 37
Timers
Option
Default
Description
A) Menu Inactivity Timer
30 (sec)
Enter, in seconds, how long a menu displays with no activity.
Zero disables the timer.
B) No Signal Reset Timer
300 (sec)
Use this timer to reset the device if it cannot find a signal strong
enough to establish a wireless connection. Enter the number of
seconds to attempt a wireless connection. Zero disables the
timer.
C) TimeOut Between Dialed
Digits
5 (sec)
Use this timer to set the maximum time allowed between dialing
two digits before the device assumes that dialing is complete.
When the timer expires, device attempts the call. For example, if
the timer is set to 5 seconds, when 5 seconds has elapsed the
device assumes you finished entering the phone number and
attempts to place the call.
Reset Parameters to Defaults
To reset all parameters to back to defaults:
● Enter Yes. Note that you must type the entire word, not just y or n.