User guide

Chapter 4 – Device Configuration
MultiConnect AW User Guide 33
CDMA Cellular Port Configuration
Network Dependent
Option
Default
Description
A) CDMA
CDMA (Internal)
No selection
B) Protocol
TCPClient
1) TCPClient option is an internet protocol intended to get data
from one network device to another.
2) Telnet option is a client communication.
3) UDP option is a connectionless protocol in that UDP makes
no provision for acknowledgement of packets received.
4) Pass Thru option allows for data to be transferred from a
legacy device to a remote destination without being modified.
C) Inbound/Outbound
Outbound
No selection
D) Wireless Connection
OnDemand
1) On-Demand option initiates the wireless connection when a
request made.
2) Always On option is always connected to the cellular
network.
Note:
If you want Always On, do not select this option until you finish
making other configuration changes.
Port Dependent
Option
Default
Description
E) Local Port
23
Local Port is the port that the MultiConnect AW listens on for
inbound traffic.
F) Remote Port
0
Remote Port is the IP port that the remote device listens on.
When you change the Remote Port, it becomes the new default
port.
G) Remote IP
none
Remote IP is the IP address of the device you are connecting to
for outbound. When you change the Remote IP, it becomes the
new default IP.
Phone Number/IP Conversion Table
Option
Default
Selection