User guide

Chapter 3 – Configuring Ports
26 MultiConnect AW User Guide
CDMA Cellular Port Configuration
1. Enter 1 for Cellular Port. CDMA is the default for the MT200A2W-C1, so the CDMA Cellular Port menu
displays.
2. Set the port options as described in CDMA Port Options.
3. Save your configuration by entering a + at the prompt. Return to the Main Menu and wait for the cellular
wireless network and the analog modem to change to a READY state. The Current Settings will change to:
(WIRELESS_READY) (ANALOG_READY).
CDMA Port Options
CDMA network Dependent
Option
Default
Selection
B) Protocol
TCPClient
Select either TCPClient, Telnet, UDP, or PassThru
Port Dependent
Option
Default
Description
Note: These options depend on your local/remote port.
F) Remote Port
1
The TCP/IP port that the remote device is listening on.
G) Remote IP
None
The IP address of the remote device on the network you are
going to.