User guide

Chapter 1 – Product Description and Specifications

10 MultiConnect AW User Guide

LEDs

LED Indicators

Signal

ALL OFF - Unit is off, not registered on network, or extremely weak signal (RSSI <7).

1 Bar “ON” – Very weak signal (7 < = RSSI < =14)

1 Bar and 2 Bar “ON” – Weak signal (15 < = RSSI < =23)

1 Bar, 2 Bar, and 3 Bar “ON” – Good signal ( 24<= RSSI < = 31)

CD – Carrier Detect – The Carrier Detect LED has three states.

Slow Blink – Waiting for wireless connection.

Fast Blink – After the wireless connection, a fast blink indicates waiting for analog connection.

Solid Blink – Both sides are connected.

LS – Link Status – Link Status is ON when the unit is registering with the network and blinks

when the unit is registered with the network.

Lights when DC power is applied to unit.

Package Contents

● 1 MultiConnect Converter

● 1 antenna

● 1 RJ-11 cable

● 1 power supply

● 1 Quick Start Guide

Notes:

● If required, your wireless provider will supply the SIM card.

● If you are mounting the unit to a flat surface, you must supply the mounting screws.

Specifications

MT200A2W-G