User`s guide

Page 159
12.4 Commands
This screen is used to define the command codes for program start requests
from the GSM telephone.
A message indicating successful program start can be sent as an option.
This is set in the iSeries.
If the program start fails, a message is always created.
Commands
Commands
List of define command codes.
Command code
The one or two character command code. This code must also be created
on the iSeries.
Command string
This is the full path and file/program name that will run when the command
code is used. A search function is available by pressing the ... -button to the
right of the field.
Parameters
Parameters used, they are referred to as %1 for the first, %2 for the second
etc.
Description
Descriptive text of the command code.