System information

•
Number
Phone number, which is used to dial to the remote workstation.
•
COM Port to use
Select the appropriate COM port, where the modem is connected to.
•
Port Baud Rate
Select the baud rate for the data transfer to the remote workstation.
•
User ID
The user ID is used to identify your managing workstation to the remote
workstation. See also the Security Services definitions in your remote
workstation for the appropriate user ID.
•
Password
This is the password for the above mentioned user ID.
•
Auto Start
The Auto Start function is used to automatically connect to a remote
workstation during startup time of TME 10 NetFinity or to automatically
activate the auto answer feature, so that requests from a managing station
can automatically be received and answered.
Figure 52. Modem Definition
Within the modem definition function, which you may have selected in the
previous menu, you define your modem settings such as modem type/model,
initialization strings and COM ports. See Appendix B, “List of Supported
Modems” on page 169 of this book for a list of preconfigured modems. Of
course you can change any of the modem definitions to fit your needs and you
may also add additional modem definitions. These preconfigured modems are
stored in the file SERMODEM.DAT in the NetFinity subdirectory, but you should
not manually change the definition within that file. Make all required changes
via the graphical user interface of TME 10 NetFinity.
38 Systems Management from an NT Server Point of View