System information

•
Alert Severity is the severity, which is later being used by the alert manager
to identify the alert and issue the appropriate action due to this severity.
•
Generate.... depending on the required status of this process you have to
select at least one of the conditions, which should lead to an alert
generation.
2.1.1.14 Serial Connection
Figure 49. Serial Connection Service
The Serial Connection Service is used to access remote workstations using TME
10 NetFinity and a serial modem link. This service is very useful if you have to
support different outlets and you don′t have any permanent connection to these
LANs or workstations.
Figure 50. Serial Connection
You can use this service for two the following functions:
1. Connect to a single workstation via a serial link
2. Connect to a remote LAN via a serial link (see Figure 50)
This means that you are connecting from your manager′s workstation via a
modem serial link to another managing workstation where the TME 10
NetFinity Manager program is also installed. You are now able to use the
Remote System Manager function of the second managing workstation to
manage all the workstations connected to this LAN. It is now also possible
to do cascading of this managing workstations by connecting one of the
TME10s within the remote LAN via a serial link to a third managing
workstation and from there manage a second LAN with its workstations.
36 Systems Management from an NT Server Point of View