System information

complete access rights, even if they have no access rights themselves to
one of the other services.
Note: Remember to remove all access rights, including the Security Manager
access from the public user. Please define a new manager with Security
Manager access, before you remove the rights from the PUBLIC user. If you are
doing the security definitions from a remote workstation and you remove the
access rights from PUBLIC, you will be thrown out of the NetFinity access to this
workstation at the time you choose the Set button. You then no longer have
remote access to this workstation, because there has been no manager defined
who is allowed to access this workstation.
2.1.1.6 RAID Manager
Figure 27. RAID Manager Service
The RAID Manager service is used to define and control your RAID arrays which
are connected to your servers or workstations. It is very important for a network
administrator to get all possible information about the disk subsystems
especially those that are connected to the network servers. It can be used to do
the following:
•
Get status information about:
− RAID adapter
− Physical drives
− Virtual drives (arrays)
− RAID controllers
− Striping information
•
Activate and deactivate drives
•
Define and delete hot spare drives
•
Create alerts to inform the network administrator about any possible error
within the RAID arrays
2.1.1.7 System Partition Access Service
Figure 28. System Partition Service
The System Partition Service can only be used for systems that have a system
partition installed. Within a system partition you can find a lot of information
about the system configuration. For example, there are ADF (adapter description
22 Systems Management from an NT Server Point of View