System information

Figure 10. Driver Configurations Options
After you have finished your installation as a TME 10 NetFinity manager and you
have rebooted your system once to activate the device drivers you will see the
following window. You now may use the different functions of TME 10 NetFinity.
Figure 11. TME 10 NetFinity Service Manager
1.5 Hints and Tips
We didn′t experience any major problems during the installation and
configuration of this product. However, the following are some hints, which might
be of interest to you:
1. Make sure that the network drivers have been installed before installing TME
10 NetFinity, otherwise you will not be able to define the appropriate network
connection during the installation process and you will have to do it later on.
2. Think about defining Force Remote Logon for security reasons, so that
nobody else who might not be authorized can access any other workstations.
3. Don′t forget to define the Security service for each workstation. You will find
a detailed description on how to do this and what to take care of during this
process in Chapter 2, “NT Systems Management Functions” on page 11.
4. It might also be useful to define Show Execution Alerts within the Network
Driver Configuration Options menu. This enables your users to monitor the
network administrator actions when accessing the users workstation. The
information from these actions may also be logged in the alert log. If any
problem occurs later on then there is a chance that you can tell who
accessed the workstation, what services they tried to use and what the
problem might be.
10 Systems Management from an NT Server Point of View