System information

− Any Remote Host - Means, that anybody, who manages to get the
connection to your gateway may access at least the main menu of the
gateways TME 10 NetFinity Manager. How far these users can get then
depends on the Security Managers definitions in the gateway or the
managing workstation, which you should define very carefully. See also
2.1.1.5, “Security Manager” on page 20 for details on the Security
Manager definitions.
− Specific Remote Hosts - In here you define which workstations may
access this managing workstation using the Internet. See Figure 180 for
definition details on this host definitions.
Figure 180. Host Access Definition
The Add Authorized Host menu gives you the possibility to allow and restrict
access to the managing workstation from other TME 10 NetFinity managers using
the Internet. But still the TME 10 NetFinity Security Manager restricts the access
to the TME 10 NetFinity Managers Services at the gateway.
•
Authorize Specific Host - Here you can define single TCP/IP addresses of
workstations that might access your gateway and the main menu of your
TME 10 NetFinity at the gateway. In our example we use a managing
workstation that has a TCP/IP address of 9.24.104.114 defined. Only this one
workstation is now able to access this gateway.
•
Authorize Address Range - The same applies for this definition except that
here you can define an address range for TME 10 NetFinity Managers, that
may access this gateway using the Internet.
6.3 Internet Client Functions
This chapter describes the functionality and limitations when using the TME 10
NetFinity Manager and its Internet connection.
Chapter 6. Webability 153