System information

provided by a service provider and the Internet connections have been
established.
4. The gateway workstation to the Internet also has the TME 10 NetFinity
Manager code installed.
5. The TME 10 NetFinity Manager at the Internet gateway workstation has the
proper security configuration set up, so that the local managing workstation
is allowed to access this system. See 6.2, “Configuration of the Web
Manager” for details on how to set up the configuration.
6.2 Configuration of the Web Manager
Figure 178. Webability
On the gateway workstation of the remote location you have to set up some
definitions so that you are able to connect to it using the Internet. You also
want to set up some additional security, so that not everybody who establishes a
connection to your Internet gateway also gets access to your TME 10 NetFinity
functions on the gateway.
The Web access definition cannot be changed while accessing this gateway over
the Internet. This means, that you can only change the Web access definitions
for the gateway locally at the gateway workstation or from another TME 10
NetFinity Manager workstation, which is physically attached to the same LAN as
the gateway. This gives you additional security, so that nobody can define
additional access rights to your gateway using the Internet connection.
Chapter 6. Webability 151