System information

System Monitor lets you collect data during a certain period of time and
store them into the database. This data can later be used for reports.
To save data to a database do the following:
− Open the System Monitor Service.
− From the System Monitor Service top menu choose Windows and select
Export to Database.
− Select the database to export to one or more monitors and define the
time period to be monitored.
Figure 172. System Monitor Service - Database Export
− Select the database to export to and click on OK to save the data.
You can also save the data for a certain monitor by clicking on the right
mouse button on the monitor itself and choose Export to Database.
•
Event Scheduler Service
If you run one of the services mentioned before from the Event Scheduler,
you can also define to export the data to the database. Depending on the
scheduled service, the database definitions had to be provided.
The first time you export to a database you will be prompted for a user ID and a
password to log on to the database. TME 10 NetFinity stores this information
and no further logon is required.
Data will always be exported to the local database even if you run a service
through the Remote System Manager on a different system.
Remark
With WebFinity (Internet access to TME 10 NetFinity) export to database is not
supported.
142 Systems Management from an NT Server Point of View