System information

Figure 1. TME 10 NetFinity Connections
1.3 Installation under NT
In this section we describe how to install TME 10 NetFinity under Windows NT as
a manager, as well as a client.
The TME 10 NetFinity for NT consists of a package of five diskettes or one CD.
You first have to decide whether you want to install the TME 10 code as
services
or manager . On the CD-ROM you will find the code in different subdirectories.
The diskettes are labeled
TME 10 NetFinity Services or TME 10 NetFinity
Manager
. The services code is just for the clients and the TME 10 NetFinity
manager code is for managing workstations.
1.3.1 Installation of TME 10 NetFinity Services
1. Insert the first diskette for the TME 10 NetFinity Services.
2. Go to an MS-DOS command prompt and type:
A:\NETFINST
This results in execution of the installation program for TME 10 NetFinity.
3. A window will pop up indicating a default drive and directory where you
install the code. You can override the default by typing in a new location
(see Figure 2 on page 4). The installation can be from a diskette, CD or a
LAN drive. The same applies to the target drive. You should also define the
subdirectory where the code will be installed.
4. After you have defined the source and target drives you now have to define
the type of TME 10 NetFinity client you want to install. There are different
types of clients that can be installed. Figure 3 on page 4 shows the
installation options.
Chapter 1. TME 10 NetFinity Overview 3