System information

of a defined mail user and the E-Mail address of the receiver (P2) into the
appropriate fields.
•
Add alert to log file
Writes the alert to the log file of the Alert Manager.
•
Export to a DB2 Database
This action is only available if the data export to DB2 is defined. It will
append a database record for each alert.
•
Export Database Information via ODBC
This action is only available if the data export through the ODBC interface is
defined. It will append a database record for each alert.
•
Forward alert through network <P1> to system <P2>
The alert will be forwarded to another Alert Manager through the network.
<P1> stands for one of the network driver configuration enabled network
protocols (TCP/IP, NetBIOS, IPX). <P2> stands for the network name of the
receiver and depends on the protocol.
•
Play waveform file ′<P1>′
If your system is equipped for sound, the waveform file ′<P1>′ will be
played on alert.
•
Send SNMP Alert
Sends an SNMP alert to other systems according the SNMP configuration in
the Windows NT network support.
3.2.5 Command Line Interface
With the GENALERT.EXE command you can also define your own TME 10
NetFinity alert (see Figure 128 on page 103 for command line syntax). This
command can be issued from a batch file or from other programs as an external
command.
102 Systems Management from an NT Server Point of View