System information

The Alert Received window will pop up and display the alarm to the user
logged in to the system.
•
Execute command ′<P1>′
On every occurrence of the defined alarm condition, the command ′<P1>′
will be executed in foreground. Include drive, path and parameters in the
command statement.
The following variables can be passed with the command line as parameters
to the command. They are provided from the alert manager and contain alert
specific data.
%TXT Alert text
%TIM Alert time
%DAT Alert date
%SEV Alert severity
%SND Alert sender (for example,
TCPIP::NTSERV2.ITSO.RAL.IBM.COM)
%TYP Alert type
%APP Alert application ID
%AT Alert application-specific type
%P1 - %P9 Alert-specific text strings. The availability and the contents
of these parameters depend on the alert. See
TME 10
NetFinity Manager, User
′ s Guide , Appendix I, for more
information.
•
Execute minimized command ′<P1>′
On every occurrence of the defined alarm condition, the command ′<P1>′
will be executed in the background icon. Include Drive, Path and Parameters
in the command statement.
Same parameter variables as for Execute command ′<P1>′ applied.
•
Set error condition ′<P1>′ for sending system
This sets the circle and stripe sign over the icon of the system in the Remote
System Manager Group window if this alert from this system is received.
The ′<P1>′ error condition is shown if opening the Error Conditions of the
system properties (right mouse button on the system icon) in the Remote
System Manager
•
Clear error condition ′<P1>′ for sending system
This removes the circle and stripe sign from the icon of the system in the
Remote System Manager Group window if this alert from this system is
received.
•
Add Event to Event Log
The Alert Message is written to the Windows NT Application Log and can be
viewed with the Event Viewer.
•
Send to E-Mail via MAPI interface
The Alert Manager creates an E-Mail with the alert message and sends it
using the Microsoft Windows Mail Application Programming Interface (MAPI),
for example, via MS Mail or Exchange. Enter Password (P1) and User ID (P3)
Chapter 3. Alert Flows 101