System information

If you click on Alert Log Views, you can set a filter to the alert log, depending on
predefined profiles.
3.2 View Alert Log
To view the alert log, simply click on the alert and the alert details are displayed
in the upper half of the window.
To set a filter to see only specific alarms do the following:
1. Click on Alert Log Views.
2. Set time and date range if desired.
3. Activate one or more profiles.
4. Check the Enable box for the time and date range and/or the active profiles.
5. Click on Refresh to filter the alarm log.
Figure 123. Alert Manager - Set Filter to Alert Log
3.2.1 Alert Forwarding and Alert Flow
From the Alert Manager, alerts can be sent to many different destinations.
Figure 124 on page 97 shows a possible configuration for corporate-wide alert
management with TME 10 NetFinity.
96 Systems Management from an NT Server Point of View