Specifications

Chapter 4 - AT Commands, S-Registers and Result Codes

Result Codes

In command mode the MT1932ZDX can send responses, or result codes,

to your computer. Result codes are used by communications programs

and can also appear on your monitor.

AT&Q0 selects Multi-Tech result codes with

RELIABLE, LAPM,

and

COMPRESSED

modifiers (default).

AT&Q1 selects standard AT result codes without modifiers.

&Q0 Multi-Tech Result Codes &Q1 Standard AT Result Codes

Terse Verbose Terse Verbose

0OK 0OK

1 CONNECT 1 CONNECT

2 RING 2 RING

3 NO CARRIER 3 NO CARRIER

4 ERROR 4 ERROR

5 * CONNECT 1200 5 CONNECT 1200

6 NO DIALTONE 6 NO DIAL TONE

7 BUSY 7 BUSY

8 NO ANSWER 8 NO ANSWER

9 CONNECT 2400

10 CONNECT 2400

11 * CONNECT 4800 11 CONNECT 4800

12 * CONNECT 9600 12 CONNECT 9600

13 * CONNECT 14400 13 CONNECT 14400

19 * CONNECT 19200 19 CONNECT 19200

21 * CONNECT 21600 21 CONNECT 21600

24 * CONNECT 24000 24 CONNECT 24000

26 * CONNECT 26400 26 CONNECT 26400

28 * CONNECT 28800 28 CONNECT 28800

31 * CONNECT 31200 31 CONNECT 31200

33 * CONNECT 33600 33 CONNECT 33600

With error correction on,

RELIABLE

(or

LAPM

(or

) is added to these result

codes. With data compression on,

COMPRESSED

(or

is added.