Specifications

Chapter 4 - AT Commands, S-Registers and Result Codes

100 ms 1–255 6 Sets delay between when the

modem detects a valid carrier

signal and when it turns on its

CD circuit.

S10

100 ms 1–254, 7 Sets how long a carrier

255 signal must be lost before the

modem disconnects.

S10=255 causes the modem

to not disconnect with loss of

carrier.

S11

1 ms 1–255 70 Sets spacing and duration

80–255* 80* of dialing tones. 50 ms is

80–255‡ 80‡ the recommended minimum.

S13

decimal 0, 1–127 37 (%) Sets ASCII code for remote

configuration escape

character. S13=0 disables

remote configuration.

S17

10 ms 1–255 25 Sets the length of the break

time (space) sent to the local

PC when the modem receives

a remote break.

S24

50 ms 0–255 20 Sets the time the DSR, CTS,

and CD signals drop before

going high again. Used for

some PBX and CBX phone

systems.

S25

100 ms 0, 1–255 0 Sets the time the DTR signal

must be dropped before the

modem disconnects. The 0

default equals 50 ms.